is this correct for res_out ??? also uses hy_output ??? gsm 9/2018
| Type | Visibility | Attributes | Name | Initial | |||
|---|---|---|---|---|---|---|---|
| character(len=5), | public | :: | day | = | " " | ||
| character(len=6), | public | :: | mo | = | " " | ||
| character(len=6), | public | :: | day_mo | = | " " | ||
| character(len=6), | public | :: | yrc | = | " " | ||
| character(len=9), | public | :: | j | = | " " | ||
| character(len=9), | public | :: | id | = | " " | ||
| character(len=16), | public | :: | name | = | " " | ||
| character(len=13), | public | :: | flo | = | " ha-m" |
ha-m |volume of water |
|
| character(len=12), | public | :: | sed | = | " met_tons" |
metric tons |sediment |
|
| character(len=10), | public | :: | orgn | = | " kg N" |
kg N |organic N |
|
| character(len=10), | public | :: | sedp | = | " kg P" |
kg P |organic P |
|
| character(len=10), | public | :: | no3 | = | " kg N" |
kg N |NO3-N |
|
| character(len=10), | public | :: | solp | = | " kg P" |
kg P |mineral (soluble P) |
|
| character(len=10), | public | :: | chla | = | " kg" |
kg |chlorophyll-a |
|
| character(len=10), | public | :: | nh3 | = | " kg N" |
kg N |NH3 |
|
| character(len=10), | public | :: | no2 | = | " kg N" |
kg N |NO2 |
|
| character(len=10), | public | :: | cbod | = | " kg" |
kg |carbonaceous biological oxygen demand |
|
| character(len=10), | public | :: | dox | = | " kg" |
kg |dissolved oxygen |
|
| character(len=10), | public | :: | san | = | " tons" |
tons |detached sand |
|
| character(len=10), | public | :: | sil | = | " tons" |
tons |detached silt |
|
| character(len=10), | public | :: | cla | = | " tons" |
tons |detached clay |
|
| character(len=10), | public | :: | sag | = | " tons" |
tons |detached small ag |
|
| character(len=10), | public | :: | lag | = | " tons" |
tons |detached large ag |
|
| character(len=10), | public | :: | grv | = | " tons" |
tons |gravel |
|
| character(len=10), | public | :: | temp | = | " deg c" |
deg c |temperature |